Kupo Max Arm with Hand Wheel
SKU: KG100911 | FREE U.S. shipping on all orders over $100!
$105.95
- Adjustable arm allows positioning a camera lighting fixture or accessory within seconds
- Supports loads of up to 8.8 lbs (4 Kg)
- Large rubberized hand wheel allows joins to lock at same time for precise positioning
- Six milled flat surfaces for secure mounting
- Limited two-year warranty
Overview
The Max Arm is an adjustable arm that allows you to position a camera lighting fixture or accessory in any position within seconds! The two 5/8" (16mm) studs at either end are attached to ball joints that rotate 360 degrees plus a cut-out in the sleeve surrounding the ball allows the stud to be bent 90 degrees. One stud is tapped to receive a 3/8"-16 thread while the other is tapped to receive a 1/4"-20 thread. Each stud has six milled flat surfaces so whatever you mount on the Max Arm will not rotate. The central elbow rotates 360 degrees for infinite adjustability. The Max Arm is equipped with user-replaceable special friction discs with anti-slip rosettes prevent unwanted movement. The large rubberized hand wheel slowly increases tension until all three joints lock at once making precise positioning a breeze. Supports loads of up to 8.8 lbs (4 Kg) Black Aluminum Finish
Specifications
- Weight:
- 0.42lb / 0.19kg
- Color:
- Black
- Product Height (in):
- 2.78in
- Product Height (cm):
- 7.05cm
- Product Length (in):
- 4.26in
- Product Length (cm):
- 10.82cm
- Product Width (in):
- 2.97in
- Product Width (cm):
- 7.55cm
- Product Weight (lb):
- 0.42lb
- Product Weight (kg):
- 0.19kg
- Maximum Payload Capacity (lb):
- 8.82lb
- Maximum Payload Capacity (kg):
- 4.0kg
- Maximum Extension (in):
- 20.87in
- Maximum Extension (cm):
- 53.0cm
- Primary Material:
- Aluminum & Steel
- Secondary Material:
- Thermoplastic Rosettes
- Warranty:
- Limited Two-Year Warranty
- Fixed Stand Adapter:
- Two Baby 5/8" (16mm) Studs. One tapped with 3/8"-16 and the other with 1/4"-20 Female Threads.