Hello and welcome to this short video on the Kupo 3" Brake Casters for ⅞” Round Legs, set of three. These rubber casters are 3” in diameter, they have brakes to prevent them from rolling. Just step on the larger bottom tab to activate the brake. To release the brakes, just step on the smaller top-tab. These wheels have a ⅞” diameter casting designed to accept ⅞” round legs. Let's mount these bad boys on our Baby kit stand. First, place the nut inside the casting with the blue washer facing up. Then insert the caster through the slot at the bottom of the casting and turn clockwise until snug. To prevent the caster from spinning ,activate the brake by pushing down on the larger tab, and turn clockwise until snug. Align the brake pin with the hole on the inside of the leg. Now slide the leg into the casting and use an allen key to tighten the set screw until snug. Repeat with the other legs. Let the good times roll. Now that’s a wrap – thanks for watching.

When it comes to your image-making dreams, and your grip equipment at Kupo we like to say, “Never let go.”