Kupo Double Ball Joint Adapter with Dual 5/8-in Studs
Apr 11th 2022
Hello and welcome to this short video on the Kupo Double Ball Joint Adapter with Dual ⅝” Studs. Ths adapter consists of one Baby ⅝” stud with a ball joint and a ¼”-20 female thread on one side, and another Baby stud with a ball joint and a ⅜-16” female for it on the other side for additional mounting options, joined in the center with a clamp with a ratcheting handle to tighten and loosen both ball joints simultaneously. Let's mount this elinchrom monolight to the main riser section of our C-stand. First place the jaws of our Convi clamp around the riser section of our C-stand and turn the handle clockwise until secure. Next we will hold down the silver release button on our Convi clamp and insert one of the Baby studs from our adapter. secure in place with the setscrew. Next place the monolight Baby receiver onto the double ball joint’s other Baby stud and secure in place with the set screw. Holding the monolight in one hand, loosen the handle on the double ball joint adapter. Position a monolight where you'd like it and tighten clockwise to secure in place. Now that’s a wrap.
When it comes to your image-making dreams, and your grip equipment at Kupo we like to say, “Never let go.”