Hello and welcome to this short video on the Kupo Sidearm with Baby ⅝” Pin & Receiver with baby 5/8 inch pin and receiver. The baby sidearm enables you to mount a light fixture or accessory in any position on the riser section of a light stand without the need for additional clamps. On one side features a clamp that can be mounted to any riser section that's 1-¼” to 1-½” in diameter. This arm is most commonly used with C-stands. It also provides some offset or a distance of 19.5” from the light stand. On the other side the Baby sidearm features both a Baby pin and a Baby receiver, giving you flexible mounting options. Let's mount an elinchrom monolight to the riser section of a C-stand. First we'll bag our stand for safety. :loosen the wing nut until you could swing the bolt past the clamp to open it. Place and close the clamp around the riser section, swing the bolt back in place and tighten until secure. Slide the Baby receiver of the elinchrom monolight onto the baby ⅝” pin and secure with the set screw. Now that’s a wrap.
When it comes to your image-making dreams, and your grip equipment at Kupo we like to say, “Never let go.”