Hello and welcome to this short video on the Kupo Telescopic Hanger with Stirrup. Telescopic Hangers drop the mounting height of light fixtures in studio environments with tall ceilings. The hanger is attached to a lighting pipe grid via quick release clamp, allowing quick and secure mounting. To mount the clamp, press the black button and pull back on a rotating knob then push it closed around the pipe and turn the knob clockwise until snug. Just as the name implies, this hanger will extend to reach the optimum height for the perfect lighting angle. Once you reach a desired length, place the included safety pin through the corresponding hole in the shaft for peace of mind. Also the height of the hanger can be adjusted by loosening the knob in the back of the pipe clamp. adjust the shaft to the desired height and tighten the knob to secure it in place. These hangers come in three different adjustable sizes: 3-6’, 4-8’ and 5-10’. The stirrup is designed from pipe clamps. a quick safety cable for peace of mind and it's lights, camera, action. Now that’s a wrap – thanks for watching.
When it comes to your image-making dreams, and your grip equipment at Kupo we like to say, “Never let go.”